Download Model Steam Locomotive with Tender Ugears 460 HD Wallpaper

Wide 16:10

960x600 1152x720 1280x800 1440x900 1680x1050 1920x1200

Wide 5:3

800x480 1280x768

HD 16:9

960x540 1024x576 1280x720 1366x768 1600x900 1920x1080 2048x1152

Standard 3:2

1152x768 1440x960 1920x1280 2000x1333

Mobile WVGA 5:3

400x240 800x480

Mobile HVGA 3:2

480x320 960x640

Mobile WXGA 16:9

Rate this wallpaper

(28 votes)

Description: Model Steam Locomotive with Tender Locomotive with tender «UGEARS 460″ accommodated all the technical solutions applied in the previous models. Its extravagant view with many gears inside, represents the whole period of 19th century engineering. Time when advanced countries competed, whose locomotive is bigger, more powerful and more solid. In the locomotives of that time were used the maximum achievements of progress. This model is available only on Kickstarter and is the largest one, rich for details, so to say «the most fancy» from the entire range of UGEARS mechanical models. At the same time it is very harmonious and pleasant in handling. Every one who see the assembled model comes to the delight of originality and sophistication of the assembly. To show how the locomotive works you should switch a lever on the top of the cabin in one of three positions. In the neutral position you can roll a model and see the moving of the pistons and the drawbars on wheels. In the «forward» and «back» special ratchets on the large rubber engine starts working. Pre-blocking the transmission to the wheels by lever near the driver’s window, you can start a model with the key, which is located behind the cabin. By installing a locomotive on a flat surface or on the track it’s time to connect a tender just with easy click. Tender will lock securely. For easy detaching we designed a separate lever near the coupling. Everything is ready for launch. Now you can let the system by pressing the lever, designed in the form of a window leaf. Your locomotive will increase the speed. Distance and speed depend on how hard rubber engine was screwed. In general, due to the large cascade of gear, model can ride about 5 meters. The tender has two compartments. In a big one you can store some small items. In the cabin of the locomotive you can open doors and upper hatch. Inside you can see the driver space and some equipment. Just below the cabin door there is a retractable ladder. We tried to create such locomotive where valve and piston can operate as much realistic and asynchronously as it is possible. They open view of the model allows to understand the principle of the steam inlet into the chamber of the steam engine locomotives. This complex and beautiful machine, made entirely of wood materials, without glue, creates an unforgettable impression. Steam train is gathered step by step with very detailed colored instructions. All the details are already cut and you need just remove them from the board. At first, gather some units such as wheel base, housing, gears and then they are transformed into a ready-made model. Locomotive size: 12*3.9*4.9in (315*100*125mm) Tender size: 6.3*3.5*4.5in (160*90*115mm) Package size: 14.6*6.7*1.5in (37*17*4cm) Number of components: 480

  • Ugears - November 16, 2015 at 22:00:41
Add comment

Related wallpapers